Land Pride CA2560 Manuel d'utilisateur télécharger pdf (Page 9)

Section 1: Assembly and Set-Up

12/06/11

CA2560 & CA2572 Core Aerators 325-020M

Table of Contents

Hitch Assembly

Figure 1-1

18978

Section 1: Assembly and Set-Up

Torque Requirements

Refer to “Torque Values Chart For Common Bolt Size”

on page 19 to determine correct torque values when

tightening hardware.

Assembly Instructions

Review all safety instructions printed in this manual

before assembling the Aerator.

Hitch Assembly

Refer to Figure 1-1:

1. Install upper hitches (#1) & (#2) to frame using

1/2" x 1 1/2" bolts (#3), lockwashers (#4) & nuts (#5).

2. Install bushing (#6) between upper hitches with

3/4" x 4" long bolt (#7), lockwasher (#8) and nut (#9).

3. Tighten all hardware using torque requirements on

page 19.

NOTE: Do not tighten the hardware until assembly

is complete.

General Description

This unit is shipped partially assembled. It is the

Dealerships responsibility to finish the assembly.

Tools Required

•

Lift truck or hoist capable of handling the load

• Wrench set

• Socket set

Unloading Instructions

CAUTION

Never allow anyone under the unit while unloading.

Remove crated Aerator from the flat bed trailer with a

lifting devise designed for handling the load. Gently set

the crate down on a smooth flat work surface. Carefully

uncrate the unit to protect against scratching and/or

damaging the paint.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Pas de commentaire

Land Pride CA2560 Manuel d'utilisateur Page 9